Currency USD
6T Pump Hoist buy in Snyder
Buy 6T Pump Hoist
6T Pump Hoist

6T Pump Hoist

In stock
Reconfirm the price with seller
Shipping:
Seller
USA, Snyder
(View map)
+1(4 
Display phones
Technical characteristics
  • BrandHOIST
Description
The 12,000 lb. capacity 6T is a very popular pump hoist. Like the 5T, the 6T is extremely versatile with capabilities ranging from small submersible pumps all the way up to line shaft turbines.Fast and easy setup by means of a self supporting mast with two 3 1/2" bore hydraulic cylinders.A guy cable is not needed in most situations.Designed to allow for easy access to hard-to-get-to pumps and windmills.The 6T is designed to mount on 1 ton or larger truck.Weight is approximately 3,000 lbs.

The 6T can optionally be manufactured with a load sensing hydraulic system which features a variable axial piston pump. The pump automatically regulates and delivers the amount of pressure and flow required which provides infinite control on the load being lifted at high or low RPM. If no operation is required the pump de-strokes which eliminates power usage and overheating of the hydraulic oil.

Standard features:

  • Mast: 36 ft. high telescoping mast with 11 ft. maximum layback
  • Capacity: 6,000 lbs. single line, 12,000 lbs. with 2 part line
  • Mainline speed: 100 feet per minute
  • Mainline cable: 1/2" X 175' with open spelter socket
  • The mainline spool is driven by a heavy duty pinion gear with the pinion shaft direct coupled to the hydraulic motor. Braking is accomplished with a Smeal automatic fail safe brake.
  • Line Block: Block for reeving a 2 part line
  • Hook: 7 ton safety hook
  • PTO for standard transmission with direct mounted pump (PTO is available for an automatic transmission at additional cost)
  • Hydraulic pump: gear pump
  • The pump hoist may be mounted in a 54" x 9' utility body or on a deck
  • Open frame design allows for full use of the deck area
  • Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level
  • Hydraulic bypass valves are incorporated to protect from overloading
  • Rear hydraulic outriggers with holding valves
  • Holding valve on mast cylinders
  • White paint

Optional features:

  • Sandline winch: 2,300 lb. bare spool lifting capacity with 325 feet per minute line speed. It is power-up and power-down, however it can be ordered with the heavy duty clutch for free-fall. Braking is accomplished with a Smeal automatic fail safe brake. Spool capacity: 1,200 ft. of 5/16" cable, 850 ft. of 3/8" cable or 600 ft. of 7/16" cable.
  • Electronic speed control
  • Hydrostatic pump
  • Pipe racks
  • Oil cooler
  • Cathead
  • Breakout wrench hydraulic cylinder
  • Front hydraulic outrigger jack
  • E-3 mast extension
  • Extended mast height
  • Corded remote control
  • Wireless remote control
  • Tailgate
  • Rear bumper
  • Receiver hitch
  • Toolboxes
  • Mast lights
  • Walking beam
  • Special paint colors
  • Line-X spray-on bed liner
  • Utility body
  • Deck
  • Headache rack
  • Wire winder
  • Plastic pipe reel
  • Power to the rear
  • All other options are available on request
Contact the seller
6T Pump Hoist
6T Pump Hoist
Shipping method
Compare0
ClearSelected items: 0