5T Pump Hoist

Standard features:

• Mast: 36 ft. high telescoping mast with 11 ft. maximum layback
• Capacity: 3,000 lbs. single line, 12,000 lbs. with 4 part line
• Mainline speed: 120 feet per minute
• Mainline cable: 7/16" X 220' with open spelter socket
• The mainline spool is driven by a heavy duty pinion gear with the pinion shaft direct coupled to the hydraulic motor.Braking is accomplished with a Smeal automatic fail safe brake.
• Line Block: Blocks for reeving a 2 part, 3 part or 4 part line
• Hook: 5 ton safety hook
• PTO for standard transmission with direct mounted pump (PTO is available for an automatic transmission at additional cost)
• Hydraulic pump: Gear pump
• The pump hoist may be mounted in a 48" x 9' utility body or on a deck
• Open frame design allows for full use of the deck area
• Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level
• Hydraulic bypass valves are incorporated to protect from overloading
• Rear hydraulic outriggers with holding valves
• Holding valve on mast cylinders
• White paint

Optional features:

• Sandline winch: 1,000 lb. bare spool lifting capacity with 325 feet per minute line speed.It is power-up and power-down and also incorporates a heavy duty clutch for free-fall.Braking is accomplished with a Smeal automatic fail safe brake.Spool capacity: 1,650 ft. of 1/4" cable, 1,050 ft. of 5/16" cable or 740 ft. of 3/8" cable.
• Electronic speed control
• Pipe racks
• Oil cooler
• Cathead
• Breakout wrench hydraulic cylinder
• Front hydraulic outrigger jack
• E-3 mast extension
• Extended mast height
• Corded remote control
• Wireless remote control
• Tailgate
• Rear bumper
• Receiver hitch
• Toolboxes
• Mast lights
• Walking beam
• Special paint colors
• Line-X spray-on bed liner
• Utility body
• Deck
• Headache rack
• Wire winder
• Plastic pipe reel
• Power to the rear
• All other options are available on request