Currency USD
10T Pump Hoist buy in Snyder
Buy 10T Pump Hoist
10T Pump Hoist

10T Pump Hoist

In stock
Reconfirm the price with seller
Shipping:
Seller
USA, Snyder
(View map)
+1(4 
Display phones
Technical characteristics
  • BrandHOIST
Description
The 10T pump hoist with 27,000 lbs. capacity and a 36 ft. high telescoping mast is designed to mount on a 2 ton or larger truck.Fast and easy setup by means of a self supporting mast with four 3 1/2" bore hydraulic cylinders.A guy cable is not needed in most situations.Designed to allow for easy access to hard-to-get-to pumps.Total pump hoist weight is approximately 7,000 lbs.A deck, headache rack and toolboxes add approximately 3,000 lbs.

Standard features:

  • Mast: 36 ft. high telescoping mast with 11 ft. maximum layback
  • Capacity: 9,000 lbs. single line, 27,000 lbs. with 3 part line
  • Mainline speed: 140 feet per minute
  • Mainline cable: 5/8" X 150'
  • The mainline spool is driven by a heavy duty pinion gear with the pinion shaft direct coupled to the hydraulic motor. Braking is accomplished with a Smeal automatic fail safe brake. The winch drum has a cable storage section with enough drum width to spool a 3 part line on a bare drum.
  • The tailout winch has a 2,500 lb. lifting capacity at 150 feet per minute and uses a fail-safe brake. Tailout cable: 3/8" x 125 ft.
  • Line Block: Blocks for reeving a 2 part or 3 part line
  • Hooks: 7 ton and 15 ton safety hooks
  • PTO for standard transmission (PTO is available for an automatic at additional cost)
  • Hydraulic pump: 2 stage gear pump
  • The pump hoist is designed to mount on a deck
  • Open frame design allows for full use of the deck area
  • Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level
  • Hydraulic bypass valves are incorporated to protect from overloading
  • Rear hydraulic outriggers with holding valves
  • Holding valve on mast cylinders
  • White paint

Optional features:

  • Sandline winch: 2,500 lb. bare spool lifting capacity with 450 feet per minute line speed. It is power-up and power-down. Braking is accomplished with a Smeal automatic fail safe brake. Spool capacity: 1,900 ft. of 1/2" cable, 2,500 ft. of 7/16" cable or 3,400 ft. of 3/8" cable.
  • Electronic speed control
  • Oil cooler
  • Cathead
  • Breakout wrench hydraulic cylinder
  • Front hydraulic outrigger jacks
  • Extended mast height
  • Corded remote control
  • Wireless remote control
  • Tailgate
  • Toolboxes
  • Mast lights
  • Walking beam
  • Special paint colors
  • Line-X spray-on bed liner
  • Deck
  • Headache rack
  • Wire winder
  • Power to the rear
  • All other options are available on request
Contact the seller
10T Pump Hoist
10T Pump Hoist
Shipping method
Compare0
ClearSelected items: 0